Pneumatic Rotary Type Pulp Basil Seed Drink Piston Filling Machine

Features

1. This carbonated filling mono-bloc is made of super stainless steel. It has compact structure, good appearance, scientific and reasonable design. It is available for the bottles from 200ml to 2000ml.

2. It adopts the technology of direct contact with air conveyor and bottle inlet poking wheel, taking stead of the feeding screw and conveyors, which making it much more convenient to change the bottle shape.

3. This machine adopts advanced bottle neck clamping system, which get rid of the requirement of bottle height. So there is only a few parts need to change while different bottles are used on the same machine, such as the guide plate and the poking wheel.

4. Perfect stainless steel bottle gripper of rinsing avoids the secondary contamination by no touch with the bottle screw parts.

5. It is equipped with high speed filling valve of high precision filling.

6. The capping head adopts constant magnetic torque device to ensure the high capping quality without damage. High efficient cap settling system, cap feeding system and no bottle no cap system make the whole capping system perfect.

7. It adopts spiral descent fashion for the support plate for bottle bottom at the outlet thumb wheel. It removes the need of adjusting the inlet bottle height for change bottle models.

8. This carbonated beverage filling machine adopts advanced PLC control and touch screen. The key electric elements are from international famous brand.

9. No bottle, no filling: the machine only starts to fill when there is bottle, because there is sensor to check the bottle. It will avoid the waste of the bottle and beer. The rate of the broken bottle is less than 0.7% and the waste of the beer is less than 0.8%.

10. Easy change, save time. It can be suitable for different bottle height by the up and down device. Nylon board is easy to change. It takes less than half an hour to change the changeable parts. Therefore, this machine is the best ideal choice for beer factories.
 

 Video link

Carbonated drinks filling machine is rotary washing machine, which mainly use for beverage such as carbonate
d drink, new bottle enter the equipment by star wheel, through clip and overturn mechanism make bottle down,
after washing, it overturn bottle up automatically, then convey to the filling part by star steel, the main material a
nd washing clip is stainless steel.

 

The filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reachesthe

filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will

clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the

liquid level of the bottle reaches the trachea of the filling valve, the filling will stop.
 

The capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube pa
rts. The bottle which has finished filling will enter the capping position via the driving wheel.
 Bottles that have finished capping will be transported by the bottle pusher to the conveyor belt.

Complete Production Line

1, Water treatment system: RO purified equipment, UF purified equipment, Sand filter, Carbon filter, Water softner, Water storage tanks.

2, Beverage processing system: Syrup melting tank, Mixing tanks, Filter, Juice sterilizing machine, Homogenizer, Beverage drink pumps, CIP cleaning system

3, CO2 mixer

Carbonated beverage mixing machine structure reasonable, the mix precision is high, CO₂ mixes fully, has two times of cooling, two carbonation merits. Mainly is suitable for kinds of carbonic acid drink's mix processing, also may use in the paste drink, the fermentation drink and so on other soft drinks' mix processing.

4, Pasteurizer: Bottle inverse machine, Bottled juice sterilizing tunnel

6, PET bottle blowing system: Automatic PET bottle blowing machine, Preform unscrambler and elevator, Auxiliary machines

Our Service

The sample service
1. we can send you the video of the running machine.
2. you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3. If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.
 
Customized service
1. we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2. at the same time we will give you our professional suggestion.

After-sales service
1. we will provide the bill of load on time to make sure you can get the machine quickly.
2. when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training.
3. we provide one year warranty with spare parts free.