What Thickness and GSM Options Are Available for Custom Aluminum-Laminated Cardboard

2026-11-12

Selecting the right specification is one of the most important decisions when sourcing Custom Aluminum-Laminated Cardboard. At ZHONGYI, we work with packaging engineers, brand owners, and converters every day, and the first question is almost always about thickness and GSM. This guide explains the standard ranges, how the two measurements relate, and how to match a specification to your application.

Custom Aluminum-Laminated Cardboard

Understanding Thickness vs. GSM in Custom Aluminum-Laminated Cardboard

Thickness and GSM describe different properties, and both matter:

  • Thickness (mm or micron) — the caliper of the finished board, including the aluminum foil layer. It governs stiffness, structural strength, and puncture resistance.

  • GSM (g/m²) — the total gram weight of the laminate, including board, adhesive, and foil. It indicates material density and directly affects cost and barrier performance.

A common mistake is specifying one without the other. Two boards with the same GSM can perform very differently if the foil gauge or adhesive coat weight differs.

Standard Thickness Options at ZHONGYI

Thickness Range Typical Structure Best Suited For
0.5–1.0 mm 200–300 GSM board + 6–7 µm foil Light retail cartons, cosmetic sleeves
1.0–1.5 mm 300–400 GSM board + 7–9 µm foil Food takeaway boxes, bakery trays
1.5–2.0 mm 350–450 GSM board + 9–12 µm foil Frozen food, grease-heavy applications
2.0–3.0 mm 400–600 GSM board + 12–20 µm foil Heavy-duty industrial and export packaging

Standard GSM Options at ZHONGYI

GSM Range Foil Gauge Key Characteristics
200–250 GSM 6–7 µm Flexible, low-cost, good for dry goods
250–350 GSM 7–9 µm Balanced stiffness and barrier, most popular
350–450 GSM 9–12 µm High moisture and grease resistance
450–600 GSM 12–20 µm Maximum rigidity and long shelf-life protection

How to Choose the Right Combination

Use these guidelines when specifying Custom Aluminum-Laminated Cardboard:

  1. Match foil gauge to barrier needs. Grease and moisture require 9 µm or higher; dry products can use 6–7 µm.

  2. Match board GSM to stacking load. Retail shelf displays typically need 300–350 GSM; palletized export cartons need 400 GSM and above.

  3. Account for converting. Die-cutting, creasing, and folding behave differently above 2.0 mm — confirm tooling tolerances early.

  4. Test before scaling. Request samples at two adjacent specifications to compare stiffness and seal performance.

FAQ: Custom Aluminum-Laminated Cardboard

What is the minimum order quantity for custom specifications?
Minimum order quantities depend on the structure and print requirements, with standard foil gauges and board weights available at lower volumes and fully bespoke laminations requiring higher run sizes; ZHONGYI confirms exact MOQs during quotation based on your drawing and annual forecast.

Can the aluminum foil layer be customized separately from the board GSM?
Yes, foil gauge and board GSM are specified independently, so a converter can pair a lightweight 250 GSM board with a 12 µm foil for maximum barrier at reduced overall weight, or a heavy 450 GSM board with a thin foil where rigidity matters more than barrier.

Is Custom Aluminum-Laminated Cardboard suitable for direct food contact?
Food-contact suitability depends on the grade of board, adhesive, and foil used, and ZHONGYI supplies food-grade constructions with compliant adhesives and documented migration testing so the finished laminate meets the regulatory requirements of your target market.

How does thickness affect printing and finishing?
Boards up to about 1.5 mm run reliably on standard offset and flexo presses, while thicker 2.0–3.0 mm stocks may require flatbed die-cutting and adjusted creasing profiles; foil surfaces also demand primer selection matched to the ink system.

What lead times apply to custom thickness and GSM orders?
Sampling typically takes 7–10 working days, with production runs scheduled after sample approval; ZHONGYI provides a confirmed timeline with each quotation and flags any non-standard foil gauge that requires extended procurement.

Contact Us

Ready to specify the right thickness and GSM for your project? Contact ZHONGYI today for a free technical consultation, sample request, and quotation on Custom Aluminum-Laminated Cardboard — our team will recommend the exact structure for your barrier, strength, and budget requirements.

Previous:No News
Next:No News

Leave Your Message

  • Click Refresh verification code